Subject: Tracy Crooks injector's and pressure set up.
From: Paul
Date: 10/14/1999, 2:29 PM
To: zz

X-Mozilla-Keys:                                                                                 
Tracy Crook wrote:


Here are the real world numbers I am running at using the stock 550 cc
injectors and a fuel rail pressure of 40 psi.  At WOT and 6000 rpm the
injector duty cycle is around 33% with a fuel flow of around 16 gph (96
pound/hr).  I can burn around 17 GPH at slightly higher engine speeds.

I'd like to be wrong but I don't think there are any great benefits to
higher fuel pressure.  The obvious  question must be asked:  If you could
get 20% better fuel economy by doing this, why wouldn't all the
manufacturers be doing it?  No, I will not believe it's because they didn't
think of it.  There are also some other limitations that will be a problem.
Due to the physics of the injectors, pintle style injectors will not work
reliably below about 1.2 millisecond on times.  That's why the injectors are
staged.   Given these factors, 720 cc injectors are way beyond what is
needed for even a turboed 13B in aircraft service.  If you did use 56 psi,
the  thing probably would never idle.

For what it's worth...........

Tracy
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org