X-Mozilla-Keys:
Kevin Walsh wrote:
Based on my numbers (from the old John Roncz
spreadsheets) Mike Arnold would still have him beat.
If you run the numbers for the Cosman at 2/3 power
(44HP) and reasonable numbers for prop efficiency,
etc. you get an equivalent flat plate drag area of
1.047 ft^2. A very respectable number, but much more
than the AR-5 at 0.88 ft^2. In order to get the
Cosmon past the AR-5 you'd likely have to push it with
78.5 HP. Not an unreasonable amount, but it does
point out that the Cosmon is a less efficient airplane
than the little AR-5 with a 65hp Rotax.
If anyone is really interested, the AR-5 is for sale,
and you could stuff your favorite 1 rotor 100HP mill
in there and probably run the gates at around 239mph.
Now a plane like Lars Giertz's ill fated V-max Probe
pushed by a 100hp single rotor just might be the
ticket you need to push past 300mph.
Kevin Russert Walsh
Process & Equipment Development Engineer
Inhale Therapeutic Systems, Inc. (NASD:INHL)www.inhale.com
Mike Cosman, designer of the Cosman speedster responds;
Let's see now...
Arnold was allowed to follow a 2% descent profile through the timed
course.
213 mph is 312 feet per second, times 2% is 6.24 vertical feet per
second.
The AR5 weighed 660 pounds, so the effective power added by his descent
profile was 660*6.24/550 = 7.5 horsepower. Since this is power actually
delivered to the airframe, not shaft horsepower that must work through
propellor inefficiencies (say 85%), then this is equivalent to another 9
horsepower. The AR5 efficiency claims should at least reflect the 74
equivalent horsepower actually applied to the airframe.
I sure do like the way this guy calculates. PL
Now, Ron was burning about 4.1 gallons per hour during the
Copperstate dash. I would guess that the AR5 was burning close to twice
that during its very short burst of speed, and that the rotax was
probably
being pushed to provide much more than its rated 65 hp. Mike Arnold
could,
of course, should validate his record claim by entering any equivalent
cross-country
air race and showing that he can go this fast regularly, for meaningful
distances, under real-world conditions (Ron has won Copperstate
twice...)
P.S. Look for Ron to better 200 mph next year without overspeeding his
stock A65 engine.
The gauntlet has been thrown down.
Chris
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org