Subject: Heat transfer and thick rads.
From: Paul
Date: 10/16/1999, 4:30 PM
To: zz

X-Mozilla-Keys:                                                                                 
Rodger Hilyard wrote:

Paul wrote:

I am pretty sure about one thing however and that is keep it
as thin as possible. The average difference in temp between
liquid coolant and air is then a maximum. That in turn
means some kind of oblique or angled cooling block system
is best.


Paul , the thermoconductivity of copper or aluminum is 100 to
1000 times better than any of the other thermo impedances in your
radiator, the thickness of the radiator tubes is better sized to
pressure and weight concerns, than heat flow gains.

 Rodger.

I wasn't talking about the thickness of the metal of
the tube walls Rodger. I was talking about the overall thickness
of the rad itself. As the air travels through a thick
rad it gains heat. This means the difference in air temp to
that of the coolant temp becomes less. Since the rate of
heat transfer is a function of this diffference thick
rads are not as efficient in this regard as thin rads.
Corky Bell is fond of saying the first half of the rad
does 3/4 of the work.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org