Subject: Coolant lines and connections.
From: Paul
Date: 10/21/1999, 8:17 PM
To: zz

X-Mozilla-Keys:                                                                                 
Bill Freeman wrote:

Paul,

I believe that tools to roll proper ribs on the end of thinwall alum
tube are available, so why not join your rigid alum coolant lines with
short sections of rad hose and a pair of clamps.  When clamped beyond
a properly rolled rib, these jts are very reliable in actual service and would
be much cheaper simpler and probably even lighter than the Wiggins
joints.

Fill the thinwall alum tube with sand, vibrate it down and top off, weld the
end shut and then bend with proper roller type benders to make the shape
you need.  Cut off the ends and roll on the ribs, join with 2" long rad hose
and worm clamps.

Same system should work fine for intake manifold, like the O-470 type.

Bill

I still don't like hose clamps :-)
Not in my airplane.

An intake leak is one thing a coolant leak is a whole nother world :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org