Subject: Oil to water cooling in the pan
From: Paul
Date: 10/21/1999, 6:03 PM
To: zz

X-Mozilla-Keys:                                                                                 
Fred wrote:

I believe that with the high heat rejection in the rotary, cooling oil by
putting water tubes in the pan would be ineffective.  You need a fairly high
velocity over the surface to transfer heat to or from the liquid.  This would
be the case for the coolant in the tubes, but not for the oil which would be
more or less just lying there circulating comparatively slowly.  So the tube
wall might be cool, but most of the oil would pass over the cooler surface
and the oil would remain hot.  Properly designed heat exchangers try to
maintain reasonably high velocities and thin boundary layers to minimize
resistance to heat transfer.  This does not occur in the oil pan (alas).

Fred


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org