Subject: Chuck Dunlap's Air Flow sensors
From: Paul
Date: 10/29/1999, 3:35 PM
To: zz


I will hold it outside the car window tomorrow and see how
fast one has to go before it start rotating.



Jeff Spitzer wrote:
Don't forget that outside the car window is the screwed up and highly
accelerated flow coming off the windsheild.  Not a valid calibration by any
stretch of the imagination.

Jeff Spitzer

If I mount it on a stick how long does the stick need to be? :-)

We are not looking for NASA quality  results here  Jeff :-)
Just gross relative numbers. So far 90% of the air is coming
out of the last half of the angled rad with a simple
wedge diffuser. I would be happy with 60% 40% +/- 10%.


Jeff Spitzer wrote:
I'd feel pretty comfortable with one car width.  The longer the better.  If
you mount the stick to the front bumper instead and go about 5 feet forward
then you can still legally drive it and the results will be better yet.
Wire is cheap ;-)

Jeff Spitzer

No problem with driving it sticking out the side. My 65 mile trip to
Santa Paula
each day is down a little traveled road.

BTW the little one starts to rotate at about 10-15 MPH and really zings
at 40 MPH. There appears to be some hysteresis or break away torque as
once 
it starts rotating it keeps spinning even if you slow below 10 MPH.

OK guys the K&M diffuser is working great. Time for some in the air
real world measurements. Get some of these little fans installed
and report the results. I can't garantee your airplane will cool
better as just because the rad flow is uniform does not mean it 
will necessairly cool better but it probably will.
For all you people with wedge shaped ducts you need to put a curve
in them restricting the air flow to the back end of the rad.

That is my loyal assistent Mikey. He never asks for a raise,
is always on time for work and never complains about working 
conditions. If you look closely you can just see the K&M
curve in the shiny part of the duct.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org