My only employee is helping out with scale in this picture.
This universal motor mount welding fixture can be adjusted to handle
any Questair type mount and perhaps one or two other types
that fit in a box 36 by 24 by 24 inches.
It is largely built from perforated angle iron and the diagonals
are 1/4 inch conduit with flattened ends. These are used for
torsional stiffness. Some of that stiffness
can be had by merely clamping it down to the
welding table assuming the welding table is
not warped. I used 5/16 cheap bolts to hold it together.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org