Subject: Is the rotary designed for direct drive?
From: Paul
Date: 11/2/1999, 10:18 AM
To: zz

X-Mozilla-Keys:                                                                                 
Perry Mick wrote:

Can the rotary engine handle the thrust and gyroscopic forces
of direct-drive?

This has been a concern of mine ever since I went on this
path.  I voiced it to a local EAA type about a year ago, and he
suggested I fly it for awhile, then tear down the engine and
inspect it.

In all the discussions we've had on this list about direct-drive,
no one has voiced any concern that perhaps the engine design or
the bearings can not handle continuous operation in this mode.

I flew yesterday for 1.1 hours at 5000 ft.  Everything works great.
I flew today for 0.7 at 3000 ft.  But it seems like my vibration
is getting worse again, it seemed like it was getting worse this
morning as my flight progressed, so I landed early, having planned
to stay up for 1 hour.  Granted, since I have a rigid mount,
any vibration will be felt.  But it was very low after the
dynamic balance, and now seems worse again, after 2.1 hours.

Since I haven't been inside one of these engines yet I can't
evaluate this for myself.  I have a 13B in my garage now, that
I'm just starting to tear down.

So can any of you experts out there who have been inside these
engines aggravate or alleviate my concerns about this?


Perry Mick
perrym@teleport.com
Duckt N7XR
http://www.mickaircraft.com/duckt.htm

Well Perry we know the Mazda thrust bearing won't take much abuse
as several have been destroyed by the earlier Ross gear box 
thrust from the helical gear set. The e-shaft is quite
strong so I am not too much worried about the gyro prop forces
on the shaft. I think the main thing you need to worry about
is the thrust bearing. I have no idea why the vibration is
increasing but you had better find out before you fly it
again. Check the clearance in the rear main as a wild
ass guess. Also take the prop off and run it.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org