X-Mozilla-Keys:
Perry Mick wrote:
George Moore wrote:
Paul & Perry,
I'm curious at this point in the design, assuming that the vibration
problem is solved, what would be the results of adding an inline
planetery drive, like the Ross, which would put the prop much farther
back from the restrictive cowling. And of course, extending or
relocating the duct with the prop ? Would this change in prop rpm
operating range totally negate the eficiency of ducted fan operation or
could this be made to work ? I realize that Perry really wanted to
design around the Direct Drive concept, but sometimes you gotta change
horses mid stream to get to town !
George Graham said if he was designing for direct-drive he would use the
Mazda transmission in 4th gear. Chuck Harbert says I need to add
bearings.
Both of these solutions defeat the simple approach I was attempting,
which means if there is a real mechanical problem here, the approach
needs to be abandoned. There is no reason to retain direct-drive/ducted
fan, if the rotary cannot be operated in this mode without engine modifications
or mechanical add-ons, which I am not equipped or prepared or qualified
to do.
Unless of course you want to replace a gas turbine core engine in a
turbo
fan with a high power turbo rotary such as Jim Mederer is developing. In
that
case a gear box that could handle 900 HP is too costly and too heavy
so ducted fans then make more sense. They would have half the fuel burn
of
a gas turbine core engine hence double the range and be quieter and
have less vibration than a 900 HP propellor. Potentially an airplane,
with enough power such as two rotary engine powered ducted fans, would
be faster than a prop driven airplane. Ducted fans only make sense
if you have a lot of excess power and you want to go 400 MPH or
more. PL
Removing the duct and bolting a Ross PSRU onto my existing installation
would be straightforward. My earlier cooling problems may resume, on
the ground anyway.
Perry Mick
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org