X-Mozilla-Keys:
Mike Wills wrote:
Bill Freeman wrote:
Paul,
A whole new 4130 truss motor mount, using existing std firewall
attach points will be much lighter, stronger, fire resisteant, fatigue
resistant and stiffer (less vib problems) likely have better accy
access and probably cost less in the bargain since with the adapter
concept you have to buy a std motor mt and then build up this
structurally inefficient adaptor, too.
Bill
Bill,
In an RV kit the motormount comes as part of the finish kit. The gearleg
sockets are integrated into the mount also. From the factory the gearlegs
are precision machined to fit each individual mount. The point is that I
already have the factory mount and gearlegs. If I cut it up and then later
decide to switch to Lyc power for whatever reason I have 2 choices. I can
either cut off the 13b structure and re-weld a structure compatible with
the Lyc, or I can replace the modified mount with a factory new mount and
gearlegs from Vans. The first choice sounds like a major pain in the butt
and the second is $1000.
But as I said in a previous message I am becoming convinced that a
conventional welded truss is probably a better choice. The biggest hassle
is the space under the engine that I'm going to lose for radiators. I guess
I'll deal with that. Thanks for the input.
Mike Wills
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org