X-Mozilla-Keys:
charles.harbert wrote:
Perry, I'll add just one last bit of comment on thrust loads for the 13B. I
know several people have lost their engine thrust bearings because of the small
constant gear thrust from the PSRU helical gears which would have produced
catastrophic results had they not been discovered. One ended up rebuilding the
entire engine and replaced the eshaft due to excessive wear on the thrust face.
The thrust loading for a direct coupling is many, many times this small PSRU
load. Essentially, you are pushing the entire plane thru a 1/4" wide Torrington
needle bearing (originally designed to only take intermittent throw out bearing
thrust loads). It can't take these higher loads for very long before failing
IMHO.
Bill Freeman came up with a good method to retrofit your combination which I
hope you will consider.
Perry Mick wrote:
I've started disassembling a 13B in my garage, and when I took the
front cover and components off, I was shocked when I saw the size
of the thrust bearing. I have no knowledge of how to analyze it's
capability, but it sure doesn't look like much.
I have 44 hours on the hobbs meter, and I would guess at least 35
of those hours have been spent taxi-testing or flying. Actually the
flying part is about 5 hours. So there are a lot of hours of thrust
producing activity already on the engine.
Maybe now is a good time to take the engine off and see what it
looks like inside. Bad weather is setting in anyway. Thanks for
the input, Charles.
Bill's ideas are good if I want to stay with what I've got, but it
seems like it would be easier to call up Mr. Ross. My plane would
go faster in the end anyway.
Perry J. Mick
Mick Duckt N7XR
http://www.mickaircraft.com/duckt.htm
I think you might be better off with one of Tracy's PSRU's
Perry. Give him a call too. I think you will save some money too.
BTW if you measure the thrust bearing for me I will look it up in the
Timken
catalog and post the rating.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org