Subject: Is the rotary designed for direct drive?
From: Paul
Date: 11/4/1999, 7:04 AM
To: zz

X-Mozilla-Keys:                                                                                 
Vance Jaqua wrote:


Well - I just had to add my 2 cents in since I am a
fan of direct drive in many cases. Since this is a
pusher, the thrust load is much less than clutch force
with a manual transmission. I do not know about
Mazdas, but V8's are regurally run by many swamp boat
guys working on the cheap, and talking to some of them
thru my friends at Sensenich they have never heard of
a broken crank from the outrageous gyro loads these
wild men put on their boats ( most of the more
sophisticated ones use reduction since static thrust
is the main game here). Many reduction drives
cantilever the first gear or pulley off the end of the
crank with no evidence of problems (but I do not
approve of that),Vance


Gee Vance I got another story. There is a guy in the 
Everglades that will take you out for a price.
He runs the early 550 ci Cadilac V8's. He told me 
direct drive is fine if you don't go over bumps at
high speed. If you do the crank breaks.
I got a picture around here somewhere. :-)
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org