Subject: Is the rotary designed for direct drive?
From: Paul
Date: 11/4/1999, 4:44 PM
To: zz

X-Mozilla-Keys:                                                                                 
Jeff Spitzer wrote:

At 05:52 AM 11/4/99 -0800, you wrote:
charles.harbert wrote:


The thrust loading for a direct coupling is many, many times this small
PSRU load.

Are you sure about this?  Paul cited a pretty high number for the helical
thrust load which I believed at the time.  The thrust from that dinky prop
is probably less than 500 lb.

Jeff Spitzer

350 gross HP is 280 net HP out of the prop  at 250 MPH or 366 FPS 
is 420 pounds of thrust. About the same as I recall as the
helical gear thrust. 

In Perry case he has about 120 gross HP or 96 net HP at 120 MPH 
176 FPS or about 300 pounds of thrust. Assuming of course his
prop is 80% efficient which is doubtful. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org