Subject: Is the rotary designed for direct drive?
From: Paul
Date: 11/4/1999, 9:02 PM
To: zz

X-Mozilla-Keys:                                                                                 
Perry Mick wrote:

Paul wrote:

BTW if you measure the thrust bearing for me I will look it up in the
Timken
catalog and post the rating.

Jeff Spitzer wrote:

The thrust from that dinky prop
is probably less than 500 lb.

I think 350 is about max.

Tracy Crook wrote:

Actually, the problem is not with the load rating on the Mazda thrust
bearing.  SKF rates it at 9300 pounds.  The problem is the speed rating
which is 2800 RPM.

I was going to measure the bearing when I got home, but it looks like
Tracy already has the data.  I still can't see this as being a problem
then, as I haven't really exceeded 4650 rpm in flight.  Seems like these
bearings would be failing all the time in race cars if rpm was a
problem, do they?

Perry J. Mick
Mick Duckt N7XR
http://www.mickaircraft.com/duckt.htm

Even race cars the clutch is in for less than a second at a time.
I would not worry about it Perry unless the end play started getting
a lot more. You need to work on other things like reducing the prop
pitch
or changing the duct and cowl. You are my ducted fan guinea pig :-)
Hang in there and don't give up yet :-).

Paul

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org