Subject: oil and water coolers
From: Paul
Date: 11/6/1999, 7:40 AM
To: zz

X-Mozilla-Keys:                                                                                 
Fred wrote:

Calculating heat transfer coefficients is only one part of the process of
designing a system, and to do this requires knowledge of flow rates, tube
sizes, configurations, fluid properties, etc.  Suffice it to say that my
analysis shows that for a conventional radiator with 40% E.G. and 60% water
as coolant, you want at least 0.5 gpm per tube to maintain good coolant side
heat transfer coefficients and 0.7 gpm per tube would be nice (assuming tubes
about 0.1 by 1.0 inches in size, a standard for radiators).  Paul has results
of earlier analyses recommending radiator sizes as a function of horsepower.
Maybe we should summarize some rules of thumb and have Paul post them on his
site.  The devil is in the details, but it least it will give folks a place
to start.  What do you think, Paul?

Incidentally putting the oil cooler in front of the radiator reduces the flow
through each substantially and is not recommended (as I am sure you are
aware).  If you can do something with clever ducting of such, you would be
much better off operating each in parallel. I know that is easy to say, but
frequently difficult to achieve in practice.

Fred Moreno

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org