X-Mozilla-Keys:
<< Which would be
> better oil/air or oil/water cooling for outside temp of 90 or 40 at
altitude?
>
> I've positioned my oil HX in front of the water HX (because of (no) space
> considerations. It is working well, but I now know why applying a water
spray
> onto a radiator is so effective.
> >>
Actually, the water spray works well because the water evaporates and
"absorbes" the latent heat of evaporation, which is tremendous. This is the
heat required to transform the liquid into a gas. The heat flux coeffieient
goes from that of air->alum->coolant to air->water->alum->coolant which is
a minimal improvement if any.
Oil/water flux is so much better than oil/air that the oil/air would require
a delta T on the order of (just a ghistalt guess here) >100 deg F. Further,
the use of an oil/coolant heat exchanger, with the compatable flux and
capacity and flow rates, allows for an ultra efficient counter-flow exchanger
a fraction of the size of the oil/air cooler. However, the problem then is
one of cooling the coolant and at what point to put the exchanger so that the
oil is neither too hot nor too cold upon return to the engine.
Just babbling
Dave Leonard
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org