X-Mozilla-Keys:
Ken Powell wrote:
OK guys let me give this a shot. I am a programmer but have over 20 years
of pragmatic experience with 2-strokes. In order to run a 2-stroke at high
power settings you must run a very rich mixture to cool the piston. This
is required because you do not have as much time to transfer heat from the
piston to the cylinder between power strokes since every cycle is a power
stroke. Note that this also causes spark plug heat range selection to be
critical. When the thermostat opens and the radiator starts doing its
thing (cooling), the engine suddenly starts injesting heated air and the
already rich mixture (remember, high power requires a rich mixture) becomes
richer still; since 2-strokes are very sensitive to mixture this extra rich
mixture absolutely kills power. Carb air intake really needs to come from
outside the engine compartment! You may have heard people mention that a
2-stroke seems to run best right before it seizes. This is because the
mixture ratio for best power is much leaner than what can actually be run
due to the need for cooling the piston. This explains why we see so many
siezures or 'holed' pistons in engines being tuned by people with only
4-stroke experience. We probably have some people here running 2-strokes
who might find this explanation helpful. BTW, I am getting close to
finishing a MiniMax with a Kawasaki snowmobile engine for power.
Ken Powell
I always thought carbs mixed the amount of fuel consistent with the
mass of the air flowing through the carb. Higher temperature air
lower mass so less fuel. Am I missing something?
Now I will admit the occurance of detonation is a function of
the temperature of the intake air.
Sounds more like what Butch said. Sounds like there might be coolant
vapor getting in there.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org