Subject: Rotary Reno Racer II
From: Paul
Date: 11/12/1999, 10:26 AM
To: zz

X-Mozilla-Keys:                                                                                 
Russell Kent wrote:

Paul wrote:

Ugly as sin but what the hey? I imagine some people thought
the Gee Bee ugly in its day.

Some people still think the Gee Bee is ugly.  :-)

I think you should mount the top engine so that the power end is forward,
then the bottom engine so that the power end is rearward.  You'll need to
stagger the engines (to allow the belt room), which will give you a
desirable taper towards the front of the fuselage.  And plenty of room for
counter-contra-radiators (or whatever the official term is).

Russell Kent

Not a bad idea Russell. The down side is it will make the distance
from the CG of the engine to the spar ten inches longer and move the
CG of the top engine further forward by ten inches too.
Well maybe not if I put the turbo above the spar carry through.

Looking at the drawing again I could lower the both engines by
4 or 5 inches however and mount the rads on the side of the 
engines. Cooling air could blow over the engines and
out louvers on the side of the cowl. (I hate louvers).

Looks like time for RRR III. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org