Subject: Belt width on PSRU's & V6 STOL.
From: Paul
Date: 11/15/1999, 9:53 PM
To: zz

X-Mozilla-Keys:                                                                                 
Archie wrote:

... how wide of Gates
HTD belt to handle 200 hp at 6500 RPM (takeoff only)?  Is there a better
option than the Gates?  I'm most concerned with width since his
reduction
has the width as one of the constraints.

If this helps: We use a 5in. wide metric toothed Kevlar belt
that runs 9-11k rpm to drive a supercharger.
The supercharger absorbs an estimated 3-400 hp. to
drive. The driving force is around 5500hp.
Of course this engine runs at full power for about
5 seconds, but may give you some idea.
Archie

How many runs do you get on a belt Archie?

BTW Archie what is the composition of the fuel used?
I assume nitro methane is part of the formula.
I wonder if anybody has tried "fuel" in a rotary engine?

Also any info on that PT6 gear box you have lying around?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org