X-Mozilla-Keys:
quichote wrote:
Vance Jaqua wrote:
IMHO I think a Reno unlimited racer must be at least
50 percent of the weight, and 70 percent of the span
of the mean competitor - even if you are faster, at
some
time you will be in the wake of Dreadnaught or
similar, and you will end up making like a desert
submarine. I also think that contra rotating props is
the way to go
not so much for efficiency which is nice - but then
the busy pilot can "cob" it any time without fear of
"P"
factor. This probably means at least 1500 bhp - Vance
I have a question. Once we figure out a way to absorb 1.5-2K of HP, how
then are we going to keep that tiny motor from ripping itself apart at
the motor mounts. I have all the faith of Job in the eccentric and
rotors, but the block....equal and opposite?
Chris Cosman
Good question. I was thinking of two large 1/2 inch aluminum plates.
One at each end. Either that or a bird cage 4130 tubing structure
tying everything together. First we need a couple of three
rotors to mock it up for head scratching.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org