Subject: "Fuel" burning rotary engine? PSRU belt life.
From: Paul
Date: 11/17/1999, 6:17 PM
To: zz

X-Mozilla-Keys:                                                                                 
Archie wrote:

If this helps: We use a 5in. wide metric toothed Kevlar belt
that runs 9-11k rpm to drive a supercharger.
The supercharger absorbs an estimated 3-400 hp. to
drive. The driving force is around 5500hp.
Of course this engine runs at full power for about
5 seconds, but may give you some idea.
Archie

How many runs do you get on a belt Archie?
      Perhaps around 12- 15, and changed. (just in case)
      these are still fine looking when removed, and often
      sold to lower class racers that run them for years.

BTW Archie what is the composition of the fuel used?
I assume nitro methane is part of the formula.
      In "serious" competition, about 98% Nitro, 2% Methanol

      For "show" performance, 70-85% Nitro

I wonder if anybody has tried "fuel" in a rotary engine?
      Hmmmmm.......
      When you see a fueler grenading into a ball of fire, the
      usual cause is a piston melting and part of the nitro's
      combustion process is the manufacture of oxygen.
      Even with nitro absorbing oil, the overrich mixture
      keeps on burning.   Now with a coated wall, and an
      iron rotor, the results could be interesting. I'll bet
      it would really "turn on".

Also any info on that PT6 gear box you have lying around?
    My neglect, Paul. I have "to do" notes all over the shop
       and promise to check it out within the next few days.

Archie


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org