X-Mozilla-Keys:
quichote wrote:
Matthew Cosman wrote:
Unfortunatly I just found out that the PD is rated at 500HP @ 200rpm. This
is the largest stock PD part. If we wanted something higher we would have
to go direct and see if they will in fact make something custom. I guess
there is not a very big market for the kind of belt we are talking about.
someone mentioned machining our own HOT pulley?
You have considered two or more belts side by side Matthew?
Paul Lamar
OK, I've been thinking. How about mounting the engines in line. Have a
custom eccentric made or modified for the front engine so the
accessories end (relative to the auto install) bolts to the flywheel of
the rear motor, then all we need is a couter rotating prop off of an old
Lancaster and we're set. Is the eccentric really as bullteproof as we
all keep talking about?
Back to the belt idea though. Maybe it's time to think about a
Geschwender chain type drive instead.
Chris Cosman
I think you are pushing it Chris. All that torque going through
the front engine is not nice :-)
The Geschwender chain is a bad idea. Too weak and too heavy.
Better just make the belt wider (or use two or more) and machine
the pulleys out of 7075 T6.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org