Subject: IVO Propeller for sale.
From: Paul
Date: 11/18/1999, 8:12 AM
To: zz

X-Mozilla-Keys:                                                                                 
Sven Talo wrote:

Gentlemen,

Anybody interested in an IVO, 3- blades, 76" dia. Electrically
controlled pitch, owner asking $ 2400 CDN, only used for 1 Hr.

Contact: George Whelan (204)467-5003 after 6 PM

Sven

Peter Cowan/Lexi Cameron wrote:

Come on Sven, how about more details on your tests. What was wrong with the
prop? Not enough pitch to absorb your 250hp? What are you going to put on it
now? Me thinks you are being close to the chest on this one!

The IVO claims to be carbon fiber but only a little bit is used inside.
The rest of the prop is made with glass fiber and foam and glass
fiber is not stiff. Think of a glass fiber fishing pole.

It could be the prop is untwisting at high disk loadings.
I know the IVO bends easily as I have seen the test where a weight
is hung off the end and the blade bows much further downward
than a Warp Drive carbon fiber blade. This is not so bad
for bending but could be a problem for torsion. Torsional
stiffness is required in most props to prevent twisting.

Much depends however on the plan form of the prop blade.
Some planforms may not twist and others may untwist or
twist further with aero loads.

It could be only a problem with the varible pitch IVO
because of the weird steel rod method of twisting the
blade to change pitch. The aeroelastic properties of
prop blades are a complicated subject. It is simpler to 
make it stiff and have it work the same as the
static design (as you would expect it to work).

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org