Subject: PSRU Cog belt efficiency.
From: Paul
Date: 11/18/1999, 7:02 AM
To: zz

X-Mozilla-Keys:                                                                                 
Marc Pedings wrote:

Paul wrote:

I found this very intersting.

http://www.goodyear.com/us/powertransmission/eagle.html

Looks like the loss is about 2.5%. With the Reno racer
and a 1000 HP only 25 HP will be lost in the belts.

Let's see at 746 watts per HP
that is 18,650 watts!!. A lot of heat. We better
pay careful attention to the air flow over those belts.

Cog-belt-eff.gif

Paul Lamar

And a good set of ear plugs with the headset!  I replaced a quad V belt
condenser fan belt with Eagle PD.  Works great but humms at an almost
objectionable level driven by a 50 HP motor at 3400 RPM.  Also to mention the
sprockets are extremely heavy!

I would hate to hear a stright cut belt then. Must be painful at 
1000 HP and 10,000 RPM :-). An active noise canceling head
set should have no problem with pure tones of this nature.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org