Subject: Turbochargers for cooling air.
From: Paul
Date: 11/28/1999, 10:09 PM
To: zz

X-Mozilla-Keys:                                                                                 
Byron Brandon Ward wrote:

What I was trying to ask in my original question is if you could transfer
the heat from the radiator to the air more efficiently by first
compressing the air. I'm don't know all that much about thermodynamics, so
I wasn't sure. However, every type of engine, piston, jet, ramjet, etc.
compresses the gas before it adds the heat. In the case of a radiator, my
first guess would be that 1) the rise in temperature through the
turbocharger would lower the delta T through the radiator, and negate the
gains 2) the turbocharger couldn't flow enough compressed air and 3) there
would be more efficient ways to use the turbo, such as turbo compounding,
etc. I was just curious. Also, is there any objection to using water spray
bars continuously to cool the radiator so that the duct and radiator can
be made smaller (less draggy)?

Byron


Heat is added to air anytime it is compressed. Diesels don't
need ignition systems because the air is so hot when the
fuel is injected it starts burning. Not only that HP is consumed
when air is compressed.

The weight of the water needed for a four hour flight might be
excessive. That idea is used on Reno racers for the 15 minute 
races however.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org