Romulo Augusto wrote:
I just suggest ,the radiator can be installed
in 4 hour position, and not in 2
hour position, as show in your draw. Theres space
under the engine and adding a
P51 style intake, more space can be add over the original.
The 4 hour position ( I will do a draw and send to
you tomorrow), will be more
easy to do a exaust area optimizing the air flow
inside the cowling system.
Just a suggestion...
Romulo
Paul. In attached the draw about what I mean.
Romulo
Looks great. Another subtle advantage of this motor mount as
it gives you room to do this. You will need to adjust the
diffuser on the front side of the radiator to make sure the
airflow through the rad is uniform. I will see if I can
draw that in on your drawing shown here and re-upload it.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org