Subject: 3 bladed props with rotaries
From: Paul
Date: 12/1/1999, 10:57 PM
To: zz

X-Mozilla-Keys:                                                                                 
Joa wrote:

Had a great conversation last night with Bill
Fisher, an A&P/IA, who is the
fellow with the rotay powered Grumman.  He
mentioned something interesting.
He said that he couldn't get his engine to stop
vibrating with a 3 bladed
prop.  Said he tried *everything* trying to get
the vibration out and no
luck.  Balanced everything, tore things apart and
checked clearances (Ross
redrive), tried different props (including a Ivo
cockpit adjustable which he
now uses), all kinds of things and it wouldn't go
away until he went with a
2 bladed prop.  Then all was great.

Anybody heard about this and maybe have a clue as
to why it might be so?
Bill seemed to be a very knowledgable and thorough
fellow and I'm sure
looked into it very carefully.  Anybody know folks
using 3 bladed props
successfully on rotaries??

Joa

Vance Jaqua wrote:

In general, 3 blade props have the reputation of being
smoother than 2 blade props because of "passing
frequencies" going up from 2 per rev to 3 per rev and
being halved in intensity (one blade passing instead
of both blades passing) - specially in pusher
applications. either his prop was unbalanced or had a
sympathetic (resonant) mechancial frequency - Vance

Vance, I have been waiting for your input on the rubber
bushing in the firewall trick.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org