X-Mozilla-Keys:                                                                                 
norm doty wrote:

above the spar has plenty of room, but the layups are only 4" wide, so if
you cut 3" holes i think youd be weakening the structure that holds the
motor.
norm

The holes are only an inch and a half norm. The OD of the rubber
bushings
are three inches. Besides, what is the matter with a few extra layers of 
wider BID?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org