quichote wrote:
As Jeff said if you have room for a tuned system you will get a lower
fuel
burn. I do so I am going to use it. I am not going to use a dynamic
chamber however. A dynamic chamber is just another form of tuned system.
Tracy swears by it for his normally aspirated engine :-)
Paul Lamar
How much better fuel burn Paul?
Chris Cosman
Good question. I would guess something like .01 to .02 BSFC
Mazda did a lot of work on this and I think we posted some of
the results a ways back.
Notice the unusual flatness of the BSFC curve shown here.
This is very uncharacteristic of internal combustion
engines. They always seem to give best BSFC at best
torque and the burn goes up everywhere else.
The Leman engine shown had variable tuned intake
pipes that changed length with RPM so the engine
was mostly running at best torque all of the time.
This is a subtle point so feel free to ask questions :-)
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org