Subject: Silent Chain - ANSI B29.2
From: Paul
Date: 12/3/1999, 1:15 PM
To: zz

X-Mozilla-Keys:                                                                                 
Bill Freeman wrote:


One should not assume that the chain loads are low in an automobile camshaft
drive. While the total power consumption from the cam is very low, the
instantaneous torque can be very high. It is even higher on heavy duty
diesels where the cam drives the injectors. I seem to recall something like
400 ft-lbs (instantaneous) on the Cummins M11 cam gear.

Jon Lauter
Rotary Power Marine Corporation
www.rotarymarine.com



Bill Freeman wrote:

Good point, John.  I was thinking in terms of power, but you're
right, it is more likely designed for peak instantaneous torque,
which could be pretty high, esp with a radical cam or high perf
valve springs, or say a really cold engine with thick oil between
the lifters and the lifter bores.

Bill

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org