Subject: Ducted Fan info
From: Paul
Date: 12/4/1999, 3:39 PM
To: zz

X-Mozilla-Keys:                                                                                 
Phil Williamson wrote:


   Paul,
     I have two of those (well, awfull close anyhow. They sure look the same
to me.) sitting 5 feet from me. I bought then about two years ago while
playing with an idea I had. Like most cases, I was in over my head and
lacked the knowledge (and tools) to turn into a model, the idea floating
around in my head.

    They (the ducted fans I have) are about 4" inches in diameter and
produces one hell of a bunch of very cool sounds when (also) hooked up to my
old Makita drill motors' 9.6 vdc nicad.  I now own an 18 vdc Dewalt 1/2"
...ummm, wonder how those would do?:-)

    What messed up my idea ( I think) was that I didn't take into
consideration they both turned the same direction. I was hoping the company
made a set of blades that would allow me counter rotation.

     I hooked them both up to a makeshift motor mount and hit them with some
DC. They darn near jumped out of my stand. I wasn't prepared for the
thrust!!  :-)

     BTW, my thought was chasing after the never ending story of  VTOL. If
you're interested, I'll mail you my thoughts. Keep in mind these is coming
from a non-engineer type and I have no clue (other than what I learned while
earning my PPL) what  work for manned flight.

    Later,
    Phil

We will listen to almost anything Phil :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org