Subject: LongEZ firewall rubber bushing motor mount.
From: Paul
Date: 12/5/1999, 1:29 PM
To: zz

Perry Mick wrote:

Paul wrote:

Please don't send DWG's or DXF's Apparently there appears
to be no standardization and it is too time consuming for
me to try them out. Find if you can a Windows program
that will capture the screen while you are in your CAD program and
save it as a B/W gif or JPG and send that to me.
Also please check the file size and make sure it is under 300K.


Well I take it that last attempt didn't work either.

The only reason I was attempting to send DXF was so you would
automatically have the exact dimensions of the Long-EZ firewall
in electronic form.  But if it doesn't work for you there's not
much point.

So here are the GIFs, I do have a program that converts them.
That's what I'll send in the future.

We also have that problem at work, exporting from our schematic
capture and pc board layout software using dxf, the mechanical
guys making the drawings always have trouble with our DXF.

--
Perry J. Mick
Mick Duckt N7XR
http://www.mickaircraft.com/duckt.htm

Nice job on the drawings Perry.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Perry-Mick-left-side-mm.gif