Subject: LongEZ firewall rubber bushing motor mount.
From: Paul
Date: 12/6/1999, 7:59 AM
To: zz

Perry Mick wrote:

Some astute observers will probably wonder why that steel tube is
running right by the forward exhaust port.  That is a solution
that won't work obviously, but means that the strut on the right
side may have to mount to the upper portion of the front side
housing somehow.  If someone has a good suggestion please send
it in.
--
Perry J. Mick
Mick Duckt N7XR
http://www.mickaircraft.com/duckt.htm

Move the apex of the main support tubes on the right side 
forward under  the center housing. 
That should clear the forward exhaust pipe.
Recalculate the loads in the tubes. The rubber bushing
loads will not change.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Perry-Mick-right-side-mm.gif