Subject: Mazda manual transmission PSRU
From: Paul
Date: 12/6/1999, 9:40 AM
To: zz

X-Mozilla-Keys:                                                                                 
norm doty wrote:

the spalling and temp problems can usually be avoided by using an oil blend.
ive used castrol 90w hypoid gear oil mixed with stp in a 50/50 mix.
this was used in our race car, and our race boats, we also used the mazda
tranny.
all gears in race and it was locked like goerges for the race boats,(we used
3rd).
we tried every brand on the market at the time 1970-75, this was the best
for us.
some of the newer synthetics might be of help, but im not sure and ive never
tested any of them.
norm

This may help norm but the fundamental problem is the length of line
contact and the force on that line length. (In other words the diameter
and width of the gear and the RPM and torque)

In the case of the Ford C6 planetary set there are four line
contacts about two inches long each for a total of
eight inches. In the case of the Mazda 2nd gear
there is only one line contact about about one inch long. 
All other things are roughly equal. For this reason it is 
difficult to beat a planetary gear reduction.

Tracy has noticed some gear deterioration in 600 hours of use 
when the Ford planetary was used
with splash lubrication. He has changed the Ross design to use
postive lubrication in his new design.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org