X-Mozilla-Keys:
Joa wrote:
Actually I was kindof hoping you could help me there. I don't have a
sideview drawing of a 13B and the CG location or I would have drawn it up
(with the thrustline) per my notes (cut off of the drawing that was sent
out) of keeping the top of the engine approximately 5" below the cowl which
slopes about 6 degrees down from the firewall. Happen to have a drawing and
the CG for a Ross style drive?
As far as the distance from the prop hub, thats not as important to me right
now as it is to get the CG 26" from the firewall. Yaa, the prop location is
going to change the CG but if I go with Mantyla's drive its only slightly
shorter than the Ross unit and I should be ok.
Joa
______________________
PIW Engraving and Milling
"Affordable CNC"
Sounds like you are planning to build your own cowl. Could be a big
project. The thrust line position is important for the airplane to
handle right. When you cob it if it is too high the airplane will
not pitch up at the right rate. If it is too low the airplane
will pitch up too quickly. You should stick pretty close to
what Piper had.
Do you want me to decide where to put the thrust line?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org