Subject: 2nd gear PSRU
From: Paul
Date: 12/7/1999, 12:29 AM
To: zz

X-Mozilla-Keys:                                                                                 
Ken Powell wrote:

Racing Beat literature indicates that the standard transmission used in
the RX7 is somewhat fragile.  Note that the Turbo cars came with a
different transmission that is said to be stronger.  Internet info also
seems to back this up with indications that the mainshaft bearings are
not up to the task and have high failure rates when abused.  I was also
considering this approach until these weaknesses showed up.  Maybe Mike
Willis or Bruce Turrentine can provide us with real word experience on
the strengths of this box.  I'm saving my pennies and will probably buy
a PSRU from Tracy.
Ken Powell


Paul Yaw wrote:

My experience has been that these gears only break as the result of
ricky racer trying like hell to get rubber on the upshifts.  With the
stock flywheel weighing 25 to 30 lbs you can dump a lot of force into
the box when you upshift.  I have a buddy running 13 lbs. of boost on a
13B in a first gen. RX-7 which would be the "weak" box.  The car has
been running like this for a little over five years now with no tranny
problems, noise, crunchy shifts, or any of the usual problems.  The car
is driven hard, but the tranny is not.  I don't know if this means
anything when considering a prop, but I wanted to let you know that most
tranny problems are due to overexuberance, or solid motor and tranny
mounts. (Solid mounts and gear banging always seem to go together for
some reason.)  They even last fairly well at the drag strip IF you run
slicks which absorb a lot of the shock loads during upshifts.

PY

That sure brings up food for thought on the motor mounts.
With the prop on there being an immovable object in terms
of rotational inertia the motor mounts have a lot to
due with how the PSRU is going to hold up.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org