X-Mozilla-Keys:
Matthew Cosman wrote:
$160 apiece for 5
$130 10
$115 20
$110 30
This is of course a exact replica of the rad. our only complication is we
are not in possesion of a 13B ours is 20B. Our studio did all of the
composite dinosaurs at the Ogden Dinosaur Park. That gives you an idea of
the tooling we have for this. we are also fabricating all of our own molds
for our plane. BTW the above prices are break even materials only! We
would have to do it because we want to or, there would be some future market
potential in the mold.
Matt Cosman
Sounds like you guys do go work. Now if we can get ten
I'll buy one at $130. If the 20 B is apart you can assemble a phony
13B without e-shafts or rotors out of just the parts used on
a 13B.
BTW Matt have you talked with John Lynch? He has a four foot by four
foot by eight foot 3D PC computer controlled router good for making
models out of high density foam or wood
if you have the 3D drawing in SolidWorks or some other
3D program like Master Cam. His prices are cheap.
John Lynch <jr_lynch@earthlink.net>
If we could draw the 13B in a 3D program John could carve the plug.
John's hangar is across from mine at Santa Paula.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org