Subject: Engines from Japan and Tracy's Ignition
From: Paul
Date: 12/9/1999, 4:27 AM
To: zz

X-Mozilla-Keys:                                                                                 
To keep myself busy I am building my instruments from RMI.  I just
finished
the uEncoder and am starting the uMonitor.  The tach sensor is set up to
use
a maginto but the company says that if I know the type and voltage of
the
pulse off the electronic ignition they can help me make it work.  I am
planning on using all of Tracy's stuff.  Does anyone know the type and
voltage of the Tach pulse Tracy's ignition sends?   .... Tracy?

Thanks,
Dave Leonard


Tracy Crook wrote:


You have two choices Dave.  The EC2 puts out a high resolution Tach signal
which gives 12 pulses per rev.  I use this one with the Grand Rapids digital
tach to give 10 rpm resolution.  You can also use the tach output from the
trailing coil assembly which gives 2 pulses per rev if the high res won't
work on the RMI box.

Tracy

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org