If you belt drive this pump you may have to provide bearings to 
take the side load from the belt. It is designed to
be driven off the nose of the crank (e-shaft in our case.) PL

H.P.D. WATER PUMP
   (High Power Density)

     COOL YOUR ENGINE WITH WATER NOT FUEL!

KSE Racing Products, Inc. introduces a computer modeled water pump for
high
performance engines.  The CAD developed internal vane impeller and dual
scroll
produces the most efficient centrifugal, crank driven water pump on the
market.

The higher flow and pressure capability of the H.P.D. water pump
decreases hot spot
gasification and creates a higher degree of boundary layer scrubbing. 
This results in
improving the heat conductivity to the coolant.

The H.P.D. water pump design is the answer to the high flow and pressure
requirements of reverse flow cooling.  Large 1 3/4" inlet port and #16
(1") O'Ring Boss outlet ports are designed with high flow, low
restriction and dependability in mind.




The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org