Perry Mick wrote:
Paul:
I feel like an idiot for not finding this sooner. But hey, I'm a
novice with engines.
I read a message on Canard Aviators recently that said that 2 inches
of manifold pressure drop was excessive. Well I've known all along
that I have 3 inches of drop. I thought maybe that was just how
the stock intake manifold was. This morning I removed the air filter
(RX-7 stock, no it wasn't dirty) and bang! My manifold pressure went
from 27 inches to 30 inches and the static RPM went from 4200 to
5000! So I can get in the 5000s in the air with both my existing
props. Haven't flown it yet, no time and bad weather.
So you guys who are driving RX-7s, if you want a performance increase
remove the air filter (just kidding).
I've been designing a new intake all week, moving the dynamic chamber
and throttle into the right wing root area, where the air filter and
airflow sensor currently reside. The airflow sensor will move under
the wing, in a ram-air duct with just a small air filter. I'll
start with the stock dynamic chamber, later switch it out with a
fiberglass copy that will save a lot of weight.
Perry Mick
perrym@teleport.com
Duckt N7XR
http://www.mickaircraft.com/duckt.htm
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org