Subject: 3 rotor Mazda weight and HP
From: Paul
Date: 12/21/1999, 5:53 PM



Probably been asked many times,  but what is the weight and horsepower of the
three rotor mazda ?

Ron

You know I don't think we have ever nailed this down.
I would suggest it is 1/3 more HP than any equivalent induction
system on a 13B and at the same RPM. That would make it about
270 HP NA and up to 375 HP turbo depending on where you wanted
to set the boost. More for peripheral ports. 210 HP for the 13B and
315 HP for the 20B.

The weight is another sticky wicket. I would guess the stripped
weight is very roughly 270 pounds as the stripped weight of a 13B
is about 190 pounds. That is less; starter, intake system, exhaust, 
alternator, psru and maybe even the water pump and of course the 
flywheel and turbo. All of those things can vary in weight so it
is very hard to nail these things down. Also don't forget the
rads and fluids.

A good guess for the well installed weight of a NA 13B is about 300 pounds
(Tracy's is more but he does not have the best motor mount configuration)
so it would not surprise me if the installed weight of a  NA 20B was
up around 430 pounds. Add at least 30 or 40 pounds more for turbo's
and intercoolers.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org