Subject: IVO Props..... Natural Pitch
From: Paul
Date: 12/23/1999, 7:34 PM

Howard Wilkinson wrote:

Paul:
    I can't seem to find my IVO literature, but I believe each IVO prop has
a "natural pitch".  From this pitch you can pitch up or de-pitch the blades
depending on how the cams are installed.....  Please correct me here if I'm
wrong.
    It would seem that the solution for people who wish to fly at 200+ MPH
would be an IVO with a natural pitch for a fairly high speed.  This would
result in maximum blade efficiency at cruise speed with a slight degradation
at flatter pitch rather than the reverse.  After all people who wish to fly
at 200+ often make do with fixed pitch props, and the IVO would be vastly
superior to a fixed pitch prop.
    Lacking an IVO with a high natural pitch a determined soul would strip
down (remove gel coat) the root area, and apply glass or carbon fibre build
up to each face such that it could be machined to alter the interface angle
with the hub.  The mounting holes would then be drilled just enough over
size to get them straight, and bushed.  The additional thickness might make
modification or fabrication of actuator cams necessary.
    Is this a project for lunatics???  perhaps, but I suspect that it would
solve the problem, and that it would work...... not an endeavor for the
faint of heart or slap dash machinist.
                                                                        H.W.


I think a cuff fix is highly do-able because the loads are very low in there.

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org