For anyone interested, the IVO prop spec's are:
For engines up to 100hp
18"-52" or 35"-70" pitch range
48"-72" diameter
For engines up to 700hp
30"-90" or 45"-105" pitch range
58"-76"diameter
Based on the pictures, I would 'GUESS" that the base pitch is the low number
for each prop.
The Torsion rod twists at approximately the 70 to 75% of the diameter from
the center of the hub.
Jim
The above was taken from a IVO brochure - Due to the size of the file I am
sending only the specs
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org