Subject: IVO SPEC'S - Only the specs
From: Paul
Date: 12/23/1999, 7:25 PM


For anyone interested, the IVO prop spec's are:

For engines up to 100hp
18"-52" or 35"-70" pitch range
48"-72" diameter

For engines up to 700hp
30"-90" or 45"-105" pitch range
58"-76"diameter

Based on the pictures, I would 'GUESS" that the base pitch is the low number
for each prop.

The Torsion rod twists at approximately the 70 to 75% of the diameter from
the center of the hub.

Jim


Tracy Crook wrote:


I'm pretty sure the base pitch refers to the neutral (no tension on the
torsion rod) setting which is in the middle of the range.  (75" for the high
pitch model which is the one I tried)

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

Seems to me pitch given in inches is only relevant if you have a properly
twisted prop. That lets out the IVO.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org