Subject: Mr. IVO and his props.
From: Paul
Date: 12/23/1999, 9:39 PM


The tail and main rotor blades on the Apache Helicopter are retained by
"strap packs" which consist of multiple layers of thin stainless steel.  On
the tail rotors, the strap is about a foot long and has three holes in it.  A
center hole is bolted at the hub, and a hole at each end bolts to the tail
rotor blades.  The strap pack is enclosed in a tube at the root end of the
blade. (The Apache has 4 blades on the tail, but they are 2 each, 2 blade
"props")

The MD (formally Boeing and McDonnell Douglas) civil helicopters use similar
systems, except that the blades for the NOTAR fan are retained with kevlar
straps.  These straps are about 4 inches long with a "bushing" at each end
around which the Kevlar string is wound.  The string is covered with a
polyurethane covering.  One end of the strap bolts to the hub and the other
end bolts to the variable pitch blade.

I work in the lab that tests these and other helicopter parts, I happen to
have tested all of these arrangements personally.

There would be no reason why a cockpit adjustable variable pitch prop
couldn't use the same principles.  I think that the pitch could be adjusted
with a rod running through a hollow prop shaft on a belt type PSRU.  This is
the type of system I would like to use on my Bearhawk.

Rob Gaddy


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org