marc mularz wrote:
Paul, I have wondered about a similar idea, but using a prop with more
blades but less pitch than a ducted fan. If my math (and the physics that I
can recall) are correct, a prop with roughly a 30-33 inch diameter running
at about 5000 rpm should still have tips that are remaining sub-sonic.
Would adding blades to the prop (ie. a four or six blade model) make up for
the lack of length compared to what people are normally using with a psru?
I'm guessing that my physics knowlege has been messed-up/jumbled over the
years. Any opinions? MJM
Log on the Perry Mick's web site and read all about it.
His web site is listed on the ACER NL web site list.
http://home.earthlink.net/~rotaryeng/
Paul Lamar
My experience so far is that in the 120-140 HP range I'm operating in,
three
blades is all it can handle to get to 5000 RPM, but that's with a 37
inch
prop. If you went down to 30-33 you could probably add more blades.
The pitch
is pretty much determined by how fast you want to go at the RPM you are
able
to turn with the HP you have.
I'm turning 5200 max now, probably getting pretty close to supersonic,
but
haven't looked at those numbers in awhile. In order to get to the 6000
RPM
I've been targeting I may have to reduce the diameter a little to stay
subsonic.
It climbs like a rocket now, or at least seems that way, 1000-1200 fpm
at
80-90 knots.
--
Perry J. Mick
Mick Duckt N7XR
http://www.mickaircraft.com/duckt.htm
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org