Subject: A prop for a coot.
From: Paul
Date: 12/24/1999, 1:54 PM

jim west wrote:

On the step around 20 to 30 MPH, the problem is pushing the beast up on the step. You
could lift off at 60 to 65 MPH with 125 HP

Paul wrote:

Perhaps pumping air under there with a two cycle engine as suggested by
Howard is the way to go. If the hull is four feet wide and the contact
area is four feet long with a gross weight  of 2400 pounds that is about one psi.
At 30 MPH or 44 fps and the height above the water was 0.1 inch 
you would be shearing off roughly 20 cubic feet per second or 
1200 cubic feet of air per minute. How big (physically) of a blower 
would we need Howard? Looking in my Grainger catalog I see most
fans won't work at that pressure so we may need compressed
air. 

How about a filament wound air bottle pumped up to 1000 psi. 
How big of a bottle would we need to say.. supply 50 cubic feet of 
air (couple of seconds) at 1 psi? The idea is you get going
as fast as you can and hit the compressed air button to get
yourself up on the step and away you go. 

Strong side skirts about 1/4 inch long would 
help trap the air and perhaps live through a crabbed landing.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org