Subject: Mantyla plans built PSRU tapers
From: Paul
Date: 12/25/1999, 9:07 AM


Regarding the taper:

Matched (inside and outside) tapers are very, very difficult to machine
accurately and very difficult to measure to determine gauging positions,
interference fit, etc. The "polygon" attachment that is made, I believe, by
Stoffel (sp?) in Hawthorne, NY is purportedly the strongest method of
transmitting torque through a joint for any given shaft size. It is available
both as a straight attachment that enables easy disassembly or as a taper
that, in my view, has many of the disadvantages of a normal tapered
attachment. At RPI, we used polygons on the flywheel attachment for our 2500
hp heavy fuel rotary engines without any problems. I think that one of the
aviation engine companies has used polygon attachments on their crankshafts,
so this may not be news to the rest of you.

Jon Lauter
Rotary Power Marine Corporation

Sounds great. Got any drawings lying around Jon that you can send
us?

I am not so sure tapers are all that tough to machine now-a-days.
NC lathes are very remarkable indeed. Things are possible that are
near impossible using old operator controlled lathes.

If the angle is right the forces through a taper are transmitted
mostly be friction. As such it is the ideal torque transmitting
method.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org