Subject: Tracy's question
From: Paul
Date: 12/31/1999, 7:52 AM



Exactly right Vance. Send me your address and your
button will be on it's
way.   Correct about the distribution of the load
as well.  This unballance
of load is minimized in my drive by using the
splined drive (which has a few
thousandts of play) on the ring gear which allows
it to float to the best
possible load match.

Tracy Crook
rws@altavista.net
www.rotaryaviation.com

The Ross design lets the planet carrier float
in milled slots and Ford made the planet carrier out
of low modulas
elasticity aluminum allowing it to deflect somewhat
to equalize the
load in all four pinions. This is not true for the
Chrysler and
GM designs.

Paul Lamar

Tracy - Paul will probably accuse me of total heresy
and blasphemy if I wear the button but my address is
  Vance Jaqua 7046 Quito Ct. Camarillo, CA 93012 8849
I told him that I only let? him install the 13B in the
Cruiser because it is a 6 cylinder 3.9 litre engine
:-)
Vance

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org