Subject: Aluminum end housings.
From: Paul
Date: 2/2/2000, 10:11 PM



I won't comment on the other aspects of this thread, but 800 psi is a
reasonable value for a PEAK combustion pressure (very short duration), while
diesels run much much higher -- well over 2000 psi. That is why diesel engine
structures are so heavy - to deal with the peak combustion pressure. The mean
pressure is also known as the imep - indicated mean effective pressure -
which equals the bmep (brake mean effective pressure) plus the fmep (friction
mean effective pressure). So for an engine producing 120 psi bmep, the imep
might be closer to 200 psi (Paul, I'm sure there are curves in Yamamoto).
Jon

Yes I guess I need to convert the metric numbers into psi. I would really need
and FEA on this design but my gut is it will work.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org